23
System Operating Status
With GBAS 0-10 VDC Module
Possible Values:
Open, Closed
1. Press the NEXT key until the followin
screen is displayed.
With GBAS 0-10 VDC Module
Possible Values:
Output = On, Off
Assi
nment = Output Is Not Assi
ned
Indicate selected dia
alarms
Indicate unit at max capacity
Indicate any comp is runnin
1. Press the NEXT key until the followin
screen is displayed.
With GBAS 0-10 VDC Module
Possible Values:
0.0 to 10.0 VDC
Assi
nment = Leavin
solution temperature Assi
nment = Ckt1 liquid line pressure
Enterin
solution temperature Ckt2 liquid line pressure
Ckt1 saturated condenser temp Ckt1 sat liquid temperature
Ckt2 saturated condenser temp Ckt2 sat liquid temperature
Ckt1 suction temperature ICS Defined temperature
Ckt2 suction temperature Outside air temperature
Ckt1 suction pressure Active Coolin
Capacity
Ckt2 suction pressure
2. Press the NEXT key to display Generic BAS Analo
Output
screens 2, 3 & 4.
3. Press the NEXT key to advance to the followin
screen.
4. Pressin
the NEXT key will display the be
innin
of
the Submenu.
5. Press the AUTO or STOP key to return to the top level
status information.
GBAS (0-10VDC) Demand Limit Input Status
GBAS (0-10VDC) Binary Output OFF
Assi
ned: OUTPUT IS NOT ASSIGNED
End of Submenu (NEXT) to Re-enter STATUS
GBAS 0-10VDC Analog Output 1 0.0 VDC
Assigned: NOT ASSIGNED
To Next Page
Loading...
Need help?
General
