RLC-SVX19A-E4
5
Unit Description
The Sintesis RTAF units are helical-rotary type, air-cooled
chillers designed for outdoor installation. The refrigerant
circuits are factory-piped, leak tested and dehydrated.
Every unit is electrically tested for proper control
operation before shipment.
Chilled water inlet and outlet openings are covered
for shipment. The Sintesis RTAF features Trane’s
exclusive Adaptive Control™ logic, which monitors
the control variables that govern the operation of the
chiller unit. Adaptive control logic can adjust capacity
variables to avoid chiller shutdown when necessary,
and keep producing chilled water. The units feature two
independent refrigerant circuits. On the HSE version
each compressor is controlled by a dedicated variable
speed Adaptive Frequency Drive. Each refrigerant circuit
is provided with fi lter, sight glass, electronic expansion
valve, and charging valves. The shell-and-tube CHIL™
(Compact-High performance-Integrated design-Low
charge) evaporator is manufactured in accordance with
the Pressure Equipment Directive (PED) code. Each
evaporator is fully insulated and equipped with water
drain and vent connection.
Units are shipped with full oil and refrigerant charge.
Loose Parts Inventory
Check all the accessories and loose parts that are
shipped with the unit against the shipping list. Included
in these items will be the water vessel drain plugs,
rigging and electrical diagrams, service literature, which
are placed inside the control panel and/or starter panel
for shipment.
If optional elastomeric isolators are ordered with the
unit (model number digit 42 =1) they are shipped
mounted on the horizontal support frame of the chiller.
The isolators’ location and distribution weight diagram
is placed with the service literature inside the starter/
control panel.
Introduction
To Next Page
Loading...
Need help?
General