Trane UniTrane User Manual

UNT-SVX07J-EN 91
Zone Sensor Options
Control sensor options include both unit-mounted
(factory-installed) and wall-mounted sensors. Tracer
®
controller options available for the zone sensors are:
• Tracer® ZN010 is a stand-alone microprocessor
controller that controls fan coils and cabinet heaters.
• Tracer® ZN510 is a discrete speed controller that can
be used in a stand-alone application or can
communicate with a building automation system
using LonTalk
®
Communication
• Tracer® ZN520 is a discrete speed controller that can
be used in a stand-alone application or can
communicate with a building automation system
using LonTalk Communication
• Tracer® UC400-B delivers single zone VAV control in a
stand-alone operation or as part of a building
automation system using BACnet
®
communications
Zone sensors have an internal thermistor and operate on
24 Vac. Options with setpoint knobs are available in
Fahrenheit or Celsius. See Figure 69 through Figure 79 for
available options and model number references.
ZN010 Controller Options
ZN510, ZN520, UC400-B Controller
Options
Figure 69. Unit-mounted temperature
sensor (SP, OALMH)
Figure 70. Wall-mounted temperature
sensor (SP, OALMH)
Figure 71. Split-mounted zone
sensor, unit-mounted fan
speed control, and wall-
mounted setpoint dial
Figure 72. Unit-mounted temperature
sensor (SP, OALMH, OCC/
UNOCC)
Figure 73. Wall-mounted display
temperature sensor (SP,
OCC/UNOCC, OALMH,
COMM)
Figure 74. Wall-mounted temperature
(OCC/UNOCC, COMM)

Trane UniTrane Specifications

General

Brand	Trane
Model	UniTrane
Category	Heater
Language	English