Trane WZS User Manual

BAS-SVX04C-EN • Wireless Sensors 17
Installation
Replacing the Receiver Cover
To replace the cover:
1. Hook the cover over the top of the back plate. Apply light pressure to the bottom of
the cover until it snaps in place.
2. Install the security screw into the bottom of the cover.
Applying Power to the Receiver
Restore power to the UCM. Observe LED5 on the receiver; it will light and stay constantly
On when 24 V power is normal.
Security screw
LED5 stays constantly On after
applying power to the receiver

Trane WZS Specifications

General

Brand	Trane
Model	WZS
Category	Accessories
Language	English