Trane WZS User Manual

34 Wireless Sensors • BAS-SVX04C-EN
Operation
Requesting Temporary Occupancy
Error codes
Lock Symbol
Testing Signal Strength
Testing Battery Status
Select to request
occupancy
• If you need heating or cooling after normal business hours, you can
“request” temporary occupancy by pressing and holding it for 2 seconds.
The occupied symbol remains on the screen and the unoccupied symbol
disappears. After 30 seconds, unoccupied symbol will re-appear.
• To cancel temporary occupancy, press and hold for 2 seconds. The
unoccupied symbol will remain on the screen and the occupied symbol will
disappear. After 30 seconds the occupied symbol will re-appear.
Select to cancel
occupancy
Indicates an error code
If an error code (E0–E7) is displayed, technical assistance may be required.
Indicates that a
setting is locked
The lock symbol appears if you try to adjust a setting that cannot be changed.
Indicates
excellent
signal
strength
Indicates
satisfactory
signal
strength
Indicates
poor signal
strength
Press the Test button to display the
signal strength symbols.
Indicates full
battery power
Indicates 50%
of battery life
left.
Indicates 25% of
battery life left.
Replace batteries.
Flashing symbol
indicates that
approximately 14 days
of operation remain.
Press the Test button to display the
battery status symbols.
Use only UL-listed non-rechargeable
1.5 V lithium AA batteries (Trane p/n
X13770035010 or equivalent).

Trane WZS Specifications

General

Brand	Trane
Model	WZS
Category	Accessories
Language	English