HOW TO RIDE THE MOTORCYCLE
125
Warning
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS equipped brake system.
In this situation, braking too hard will
cause the wheels to lock resulting in
loss of control and an accident.
Reduce speed and do not continue to
ride for longer than is necessary with
the indicator light illuminated. Contact
an authorized Triumph dealer as soon
as possible to have the fault checked
and rectified.
Warning
The ABS warning light will illuminate
when the rear wheel is driven at high
speed for more than 30 seconds when
the motorcycle is on a stand. This
reaction is normal.
When the ignition is switched off and
the motorcycle is restarted, the
warning light will illuminate until the
motorcycle reaches a speed exceeding
19 mph (30 km/h).
Warning
ABS operates by comparing the
relative speed of the front and rear
wheels.
Use of non-recommended tires can
affect wheel speed and cause the ABS
not to operate, potentially leading to
loss of control and an accident in
conditions where the ABS would
normally function.
Parking
Warning
The engine and exhaust system will be
hot after riding.
DO NOT park where pedestrians and
children are likely to touch the
motorcycle.
Touching any part of the engine or
exhaust system when hot may cause
unprotected skin to become burnt.
Warning
Gasoline is extremely flammable and
can be explosive under certain
conditions.
If parking inside a garage or other
structure, be sure it is well ventilated
and the motorcycle is not close to any
source of flame or sparks. This
includes any appliance with a pilot
light.
Failure to follow the above advice may
cause a fire resulting in damage to
property or personal injury.
Warning
Do not park on a soft or steeply
inclined surface.
Parking under these conditions may
cause the motorcycle to fall over
causing damage to property and
personal injury.
To Next Page
Loading...
Need help?
General
