Triumph Street Triple S 2022 User Manual

MAINTENANCE
157
Front Brake Fluid Level Inspection
and Adjustment
Street Triple RS
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorized
Triumph dealer for advice before
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause reduced brake
performance potentially leading to loss
of motorcycle control and an accident.
3
j
a
j
c
_
3
1
2
1. Reservoir cap retaining screws
2. MAX level line
3. MIN level line
To inspect the front brake fluid level:
▼ Check the level of brake fluid visible
in the MIN and MAX section of the
reservoir.
▼ The brake fluid level in the reservoir
must be kept between the MAX and
MIN level lines (reservoir held
horizontal).
To adjust the brake fluid level:
▼ Loosen the reservoir cap retaining
screws and remove the reservoir cap
and the diaphragm seal.
▼ Fill the reservoir to the MAX level line
using new DOT 4 brake fluid from a
sealed container.
▼ Install the diaphragm seal into the
reservoir cap and make sure that the
holes for the fasteners in the
reservoir cap and the diaphragm seal
are correctly aligned.
ckks
1
2
3
3
1. Reservoir cap
2. Diaphragm seal
3. Reservoir cap retaining screw holes
▼ Install the reservoir cap retaining
screws into the reservoir cap and
diaphragm seal assembly.
▼ Hold the assembly together and
position the reservoir cap, diaphragm
seal and reservoir cap retaining
screws onto the reservoir.

Triumph Street Triple S 2022 Specifications

General

Brand	Triumph
Model	Street Triple S 2022
Category	Motorcycle
Language	English