Triumph Street Triple S 2022 User Manual

GENERAL INFORMATION
34
Left Handlebar Switches
Street Triple RS Only
3
2
4
1
5
6
1. Mode button
2. Joystick
3. Horn button
4. Turn signal switch
5. High beam button
6. Dipped beam/Daytime Running Lights
(DRL) switch (if equipped)
Mode Button
When the MODE button is pressed and
released it will activate the Riding Mode
Selection Menu in the multifunction
display screen. Further presses of the
mode button will scroll through the
available riding modes (see page51).
Joystick Button
The JOYSTICK is used to operate the
following functions of the instruments:
▼ Up - scroll the menu bottom to top
▼ Down - scroll the menu top to
bottom
▼ Left - scroll the menu to the left
▼ Right - scroll the menu to the right
▼ Centre - press to confirm selection
Horn Button
When the horn button is pushed, with
the ignition switch turned on, the horn
will sound.
Turn Signal Switch
When the turn signal switch is pushed
to the left or right, the corresponding
turn signals will flash on and off.
The turn signals can be canceled
manually. To manually turn off the turn
signal, press and release the turn signal
switch in the central position.
Automatic self-canceling turn signals
can be activated in the Bike Set Up
function on the display, refer to
page56.
There are two options available:
▼ Manual - The self-canceling function
is off. The turn signals must be
manually canceled.
▼ Auto - The self-canceling function is
on. The signals will activate for eight
seconds plus an additional 71 yards
(65 meters).
Note
If the motorcycle stops for any reason,
the signals will flash for the remainder
of the time and distance unless
manually canceled by the rider.

Triumph Street Triple S 2022 Specifications

General

Brand	Triumph
Model	Street Triple S 2022
Category	Motorcycle
Language	English