GENERAL INFORMATION
56
Bike Set Up - Turn Signals
The turn signals can be set to Auto
Basic, Auto Advanced or Manual mode.
AUTO BASIC
AUTO ADVANCED
MANUAL
TURN SIGNALS
EXIT SELECTBACK
Selecting a Turn Signals Mode
To select the required turn signals
mode:
▼ From the Bike Set Up menu, push the
joystick down to select TURN
SIGNALS and press the joystick
center to confirm.
▼ Push the joystick down/up to scroll
between AUTO BASIC, AUTO
ADVANCED and MANUAL.
– Auto Basic - The self-canceling
function is on. The turn signals
will activate for eight seconds and
an additional 71yards (65 meters).
– Auto Advanced - The self-
canceling function is on. A short
press activates the turn signals
for three flashes. A longer press
activates the turn signals for
eight seconds and an additional
71yards (65 meters).
– Manual - The self-canceling
function is off. The turn signals
must be manually canceled using
the turn signal switch.
▼ Press the joystick center to confirm
the required selection.
▼ The display will then return to the
Bike Set Up menu.
Bike Set Up - Traction Control (TC)
The Traction Control (TC) system can be
temporarily disabled. The Traction
Control (TC) system cannot be
permanently disabled, it will be
automatically enabled when the ignition
is turned off and then on again.
To disable or enable the TC system:
▼ From the BIKE SET UP menu, press
the joystick center to select TC.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
ENABLED
DISABLED
TC
EXIT SELECTBACK
▼ Press the joystick center to select
the required option.
▼ Once selected the display will return
to the BIKE SET UP display.
Bike Set Up - Service
The service interval is set to a distance
and/or time period.
To review the service interval:
▼ From the BIKE SET UP menu, push
the joystick down to select SERVICE.
▼ Press the joystick center to display
the SERVICE information.
5450 mi
01-01-2020 (335 DAYS)
SERVICE
EXIT SELECTBACK
To Next Page
Loading...
Need help?
General
