GENERAL INFORMATION
66
Reset to Defaults
The Reset to Default option allows the
Main Menu display items to be reset to
the default setting.
CONFIRM
CANCEL
RESET TO DEFAULTS
EXIT SELECTBACK
To reset the Main Menu display items:
▼ From the Main Menu, push the
joystick down and select RESET TO
DEFAULTS.
▼ Push the joystick down/up to select
CONFIRM or CANCEL. Press the
joystick center to confirm the
selection.
▼ Confirm - The following main menu
settings and data will be reset to the
factory default values - Riding
Modes, Indicator Set Up, Trip
Computers, Visible Trays, Language,
Traction Control, Style, Display
Brightness, Lap Timer settings and
data.
▼ Cancel - The main menu settings and
data will remain unchanged and the
display will return to the previous
menu level.
Information Tray
Warning
When the motorcycle is in motion, only
attempt to switch between the
information tray modes or reset the
fuel information under the following
conditions:
- At low speed
- In traffic free areas
- On straight and level roads or
surfaces
- In good road and weather conditions.
Failure to observe this important
warning could lead to loss of
motorcycle control and an accident.
Note
To access the information tray, the
warning messages must first be
acknowledged, see page67.
The information tray appears in the top
section of the display screen for styles
01, 02 and 03. It appears on the left
hand side of the display screen for style
04. It allows easy access to different
motorcycle status information.
To view the different information tray
items, push the joystick left/right until
the required information tray item is
shown.
To Next Page
Loading...
Need help?
General
