GENERAL INFORMATION
89
1. TRIP button
The display will scroll through in the
following order:
▼ Trip time
▼ Average fuel consumption
▼ Instantaneous fuel consumption
▼ Average speed
▼ Odometer
▼ Front Tire Pressure Display (if TPMS
is equipped)
▼ Rear Tire Pressure Display (if TPMS is
equipped)
▼ Trip distance
▼ Range to empty.
Each display provides the following
information all calculated since the trip
meter was last reset to zero:
Trip Time
The total time elapsed.
Average Fuel Consumption
An indication of the average fuel
consumption. After being reset the
display will show dashes until 0.1 miles/
km has been covered.
Instantaneous Fuel Consumption
An indication of the fuel consumption at
an instant in time.
Average Speed
The average speed is calculated from
when the trip computer was last reset.
After being reset the display will show
dashes until 1 mile/km has been
covered.
Odometer
The odometer shows the total distance
that the motorcycle has traveled.
Front Tire Pressure Display
Displays the current front tire pressure.
Rear Tire Pressure Display
Displays the current rear tire pressure.
Trip Distance
The total trip distance traveled.
Range to Empty
This is an indication of the predicted
distance that can be traveled on the
remaining fuel in the tank.
Trip Meter Reset
To reset the trip meter, select and
display the trip meter then press the
TRIP button for one second. After one
second, the trip meter will reset to zero.
Note
When the trip meter is reset to zero, the
trip time, average fuel consumption and
average speed will also be set to zero.
To Next Page
Loading...
Need help?
General
