Triumph Thruxton R 2018 User Manual

Maintenance and Adjustment
142
Speed Twin, Thruxton and
Thruxton R
To install the battery:
• Place the battery in the battery
case.
• Secure with the battery strap and
make sure the USB port socket is
re-installed.
• Reconnect the battery, positive lead
(identified with red tape) first.
• Tighten the battery terminals to
40 lbf in (4.5 Nm).
• Apply a light coat of grease to the
terminals to prevent corrosion.
• Cover the positive terminal with the
protective cap.
• Reinstall the seat (see page 72).
Fuses
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover) and never use a
fuse of higher rating.
Use of an incorrect fuse could lead
to an electrical problem, resulting in
motorcycle damage, loss of motorcycle
control and an accident.
Note
A blown fuse is indicated when all of the
systems protected by that fuse become
inoperative. When checking for a blown
fuse, use the table to establish which
fuse has blown.
The fuse box is located underneath the
seat.

Triumph Thruxton R 2018 Specifications

General

Displacement	1200 cc
Compression Ratio	11.0:1
Torque	112 Nm @ 4, 950 rpm
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	Chain
Gearbox	6-speed
Frame	Tubular steel cradle
Front Tyre	120/70 ZR17
Rear Tyre	160/60 ZR17
Seat Height	810 mm
Dry Weight	203 kg
Engine Type	Liquid-cooled, 8 valve, SOHC, parallel twin
Bore x Stroke	97.6 mm x 80 mm
Power	97 PS / 96 bhp (72 kW) @ 6, 750 rpm
Exhaust	2 into 2
Clutch	Wet, multi-plate
Front Wheel	17 in
Rear Wheel	17 in
Front Suspension	Showa 43 mm
Rear Suspension	Ohlins piggyback reservoir
Front Brakes	Twin 310mm
Rear Brakes	Single 220mm disc, Nissin 2-piston caliper, ABS
Instrument Display	LCD multi-functional
Width (Handlebars)	745mm
Height Without Mirror	1030mm
Wheelbase	1415 mm
Rake	22.8 °
Fuel Tank Capacity	14.5 L