93
Caution
Do not store the spare key with the
motorcycle as this will reduce all
aspects of security.
1. Key number tag
In addition to operating the ignition
switch/steering lock, the ignition key is
required to operate the seat lock and
fuel tank cap.
When the motorcycle is delivered from
the factory, two ignition keys are
supplied together with a small tag
bearing the key number. Make a note of
the key number and store the spare key
and key number tag in a safe place
away from the motorcycle.
There is a transponder within the
ignition keys to turn off the engine
immobilizer. To make sure the
immobilizer functions correctly, always
have only one of the ignition keys near
the ignition switch. Having two ignition
keys near the switch may interrupt the
signal between the transponder and the
engine immobilizer. In this situation the
engine immobilizer will remain active
until one of the ignition keys is removed.
Always get replacement keys from your
authorized Triumph dealer. Replacement
keys must be 'paired' with the
motorcycle’s immobilizer by your
authorized Triumph dealer.
Ignition Switch/Steering Lock
Tiger 1200 XR Only
P
U
S
H
P
O
F
F
O
N
2
5
1
4
1. Ignition switch/steering lock
2. LOCK position
3. OFF position
4. ON position
5. PARK position
Engine Immobilizer
The ignition barrel housing acts as the
antenna for the engine immobilizer.
When the ignition switch is turned to
the OFF position and the ignition key is
removed, the engine immobilizer is on.
The engine immobilizer is turned off
when the ignition key is in the ignition
switch and it is turned to the ON
position.
To Next Page
Loading...
Need help?
General
