- 29 -
5. Ribbon Tension Adjustment Knob
The ribbon tension adjustment knob has 3 levels of adjustment. Because the printer’s ribbon alignment is to
the left side of mechanism, different ribbon width require different tension to print correctly. Therefore, it may
require to adjust the ribbon tension knob to get your best print quality. The biggest tension is #1. Adjust the
tension by turning the knobs to suitable # (1, 2 or3) on both ribbon supply & rewind spindles, suggest the
tension # to be the same on both spindles. Factory default tension is #1.
To Next Page
Loading...
Need help?
General
