TSC MX341P Series User Manual

- 53 -
7.6 Advanced
Item
Description
Default
Language
This item is used to setup the language on display.
English
Printer
Information
This feature is used to check the printer serial number,
printed mileage (m), printed labels (pcs) and cutting
counter.
N/A
Initialization
This feature is used to restore printer settings to defaults.
N/A
Display
Brightness
This item is used to setup the brightness for display.
(Range 0~100)
50
Touchscreen
Calibration
This feature is used to calibrate the touchscreen for best
result.
N/A
Date & Time
This item is used to setup the date and time on display.
N/A
Security
This feature is used to set the password for locking the
menu or favorites. The default password is 8888.
Disable
Cutter Type
This item is used to set the cutter type.
Guillotine
Media Low
Warning
This item is used to set the warning for media low %. For
example, if setting value is 10%, when media capacity was
lower than 10%, the % will be shown in red.
10%
Menu Advanced
Language
Printer Information
Initialization
Display Brightness
Touchscreen Calibration
Date & Time
Date Format
Date
Time Format
Time
Security
Menu Lock
Menu Password
MyMenu Lock
MyMenu Password
Cutter Type
Media Low Warning
Ribbon Low Warning
Printer Head Care
Warning
Reset Counter
Interval
Contact Us

TSC MX341P Series Specifications

General

Brand	TSC
Model	MX341P Series
Category	Barcode Reader
Language	English