TSC MX341P Series User Manual

- 46 -
7.4 Sensor
This option is used to calibrate the selected sensor. We recommend calibrate the sensor
before printing when changing the media.
Item
Description
Default
Auto
Calibration
This option is used to set the media sensor type and calibrate
the selected sensor automatically. Printer will feed 2 to 3 gap
labels to calibrate the sensor sensitivity automatically.
N/A
Manual setup
In case “Automatic” cannot apply to the media, please use
“Manual” function to set the paper length and gap/bline size
then scan the backing/mark to calibrate the sensor sensitivity.
Note: The “Media Capacity” item is used to calibrate the media
capacity sensor %.
N/A
Threshold
Detect
This option is used to set sensor sensitivity in fixed or auto.
Auto
Maximum
Length
This option is used to set the maximum length for label
calibration.
254 mm
BMark
Transmitter
Control black mark sensor’s light to face up or face down
Back side
Advanced
This function can set the minimum paper length and maximum
gap/bline length for auto-calibrate the sensor sensitivity.
0 mm
Menu Sensor
Auto
Calibration
Gap
Black Mark
Continuous
Preprint
Manual
Calibration
Standard
Gap
Black Mark
Continuous
Threshold
Detect
Auto
Fixed
Maximum
Length
BMark
Transmitter
Back side
Front side
Advanced
Min. Paper
Max. Gap/Mark

TSC MX341P Series Specifications

General

Brand	TSC
Model	MX341P Series
Category	Barcode Reader
Language	English