Table 1. Certifier
®
FA Test System Parts List (cont)
Low Flow standard kit (part no. 4075)
Bacteria filter, barbed fittings, for use with
Low Flow module (single use)
Soft carrying case (holds Certifier
®
FA Test
System and accessories)
Mounting bracket (includes mounting
bracket, screws, and Velcro strap)
Pocket driver (used to remove/install the
controller module battery cover)
Certifier
®
FA Test System Operator’s
Manual (not shown)
High Flow module kit (optional) (part no. 4076)
Bacteria filter, 22-mm x 22-mm
male/female, for use with High Flow
module (single use)
Adapter, 15-mm ID x 22-mm OD
Airway pressure fitting with screen
Adapter, 22-mm x 6-mm (for interfacing
High Flow module to Low Flow filter, for
use with oxygen concentrator)
Pressure tubing, 1/8-in. ID x 1/4-in. OD x
48-in. length, silicone
Mounting bracket (includes mounting
bracket, screws, and Velcro strap)