TSI Instruments CERTIFIER FA User Manual

10 2: Setup
4. High Flow module only: install the oxygen sensor (optional,
Figure 6).
Plug the oxygen sensor cable into the High Flow module and
oxygen sensor. Turn the cable collar to secure the cable to the
oxygen sensor. Use the threaded tee to install the oxygen sensor
into the circuit. The oxygen sensor can only connect to the High
Flow module.
High Flow module
Threaded tee
Oxygen
sensor
Oxygen sensor
cable
Figure 6. Attaching the Oxygen Sensor to the High Flow Module

TSI Instruments CERTIFIER FA Specifications

General

Brand	TSI Instruments
Model	CERTIFIER FA
Category	Test Equipment
Language	English