FHC50 BACnet
®
MS/TP Protocol Implementation Conformance Statement 83
FHC50 BACnet
®
MS/TP Protocol Implementation Conformance
Statement
Date: April 7, 2010
Vendor Name: TSI Inc.
Product Name: Fume Hood Controller
Product Model Number: FHC50-BAC
Applications Software Version: 1.0
Firmware Revision: 1.0
BACnet Protocol Revision: 2
Product Description:
TSI's Fume Hood Fume Hood Controller provides a closed-loop VAV control system for proper lab hood
containment. controller assures safety by responding quickly during sash movement, or to disturbances
within the sash plane, to maintain a constant face velocity and contain hazardous chemicals. The
controller provides opportunities for energy savings, lower fan brake horsepower, smaller chillers and
lower duct work cost by reducing the volume of air exhausted from a hood when the sash is not fully
open. This model controller is capable of acting as a stand-alone device or as part of a building
automation system via BACnet
®
MS/TP protocol.
BACnet Standardized Device Profile (Annex L):
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
List all BACnet Interoperability Building Blocks Supported (Annex K):
DS-RP-B DM-DDB-B
DS-WP-B DM-DOB-B
DS-RPM-B DM-DCC-B
Segmentation Capability:
Segmented requests not supported
Segmented responses not supported
To Next Page
Loading...
Need help?
General
