ZED-F9P-Integration Manual
UBX-18010802 - R01
5 Design Page 39 of 64
Objective Specification - Confidential
5 Design
5.1 Pin assigment
The pin assignment of the ZED-F9P module is shown in Figure 37. The defined configuration of the
PIOs is listed in Table 9.
Figure 37: ZED-F9P pin assignment
Pin No Name I/O Description
1 GND - Ground
2 RF_IN_1 I RF input
3 GND - Ground
4 ANT_DETECT I Active antenna detect
5 ANT_OFF O External LNA disable
6 ANT_SHORT_N I Active antenna short detect
7 VCC_RF O Voltage for external LNA
8 Reserved - Reserved
To Next Page
Loading...
Need help?
General
