ZED-F9P-Integration Manual
UBX-18010802 - R01
5 Design Page 50 of 64
Objective Specification - Confidential
Figure 49: ZED-F9P LGA Paste mask dimensions
5.6 Layout Guidance
Presented layout guidance reduces the risk of performance issues at design level with the ZED-F9P
high precision receiver.
5.6.1 RF In trace
The RF In trace has to work in the combined GNSS L1 + L2 signal band. This requires the center
frequency for a 50 Ohm trace to be calculated midband of the GNSS receiver bandwidth. The
To Next Page
Loading...
Need help?
General
