15
Completing your first Scan
Before proceeding with the steps below, please finish the hardware and software
installation first. Refer to Quick Start Guide.
Original Placement
If scanned item is document:
1. Raise the the transparent cover.
2. Place the document (graphic, text or photo) face down on the scanner.
Center the document along the
triangular
mark.
Lower the transparent cover carefully.
If scanned item is transparency, positive, film or
negative
1. Raise the transparent cover.
2. Place the black transparency holder on the object glass of the scanner.
3. Place a transparency on the specific scanning area of the transparency
holder.
4. Lower the transparent cover carefully.