UNI-T UT105 User Manual

Model UT105: OPERATING MANUAL
53
Maintenance(1)
This section provides basic maintenance information
including battery and fuse replacement instruction.
Warning
Do not attempt to repair or service your Meter unless
you are qualified to do so and have the relevant
calibration, performance test, and service information.
To avoid electrical shock or damage to the Meter,
do not get water inside the case.
A.General Service
l Periodically wipe the case with a damp cloth and mild
detergent. Do not use abrasives or solvents.
l To clean the terminals with cotton bar with detergent,
as dirt or moisture in the terminals can affect readings.
l Turn the Meter off when it is not in use and take out
the battery when not using for a long time.
l Do not store the Meter in a place of humidity, high
temperature, explosive, inflammable and strong
magnetic field.
B.Replacing the Fuses (see figure 21)
Screw
Holster
(figure 21)

UNI-T UT105 Specifications

General

Product type	Digital multimeter
AC voltage range	2 - 750 V
DC current range	0.2 - 10 A
DC voltage range	0.2 - 1000 V
Dimensions (WxDxH)	88 x 39 x 179 mm
Battery voltage	9 V

Weight and Dimensions

Weight	352 g