EasyManuals Logo
Home>UNI-T>Multimeter>UT60E

UNI-T UT60E User Manual

UNI-T UT60E
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
l In the autorange mode, the Meter selects the best range for
input signals.
This allows you to switch test points without having to reset
the range.
l In the manual range mode, you may select the range.
This allows you to override autorange and lock the Meter in a
specific range.
The Meter defaults to the autorange mode in measurement
functions that have more than one range. When the Meter is in
the autorange mode,
To enter and exit the manual range mode:
1. Press RANGE.
The Meter enters the manual range mode and turns off.
Each presses of RANGE increments the range. When the
highest range is reached, The Meter wraps to the lowest
range.
Measurement Ranges (2)
Note
l If you manually change the measurement range after entering
the REL or Hold recording modes, the Meter exits these
modes.
l Under frequency/duty cycle and capacitance measurement,
only autorange mode is available.
2. To exit the manual range mode, press and hold RANGE for
two seconds.
The Meter returns to the autorange mode and is displayed.
is displayed.
13
Model UT60B/C/E: OPERATING MANUAL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the UNI-T UT60E and is the answer not in the manual?

UNI-T UT60E Specifications

General IconGeneral
BacklightYes
Product typeDigital multimeter
Frequency range0.01 - 10000 kHz
AC current range0.4 - 10 A
AC voltage range4 - 750 V
DC voltage range0.4 - 1000 V
Dimensions (WxDxH)85 x 177 x 40 mm
Battery voltage9 V
Weight and Dimensions IconWeight and Dimensions
Weight320 g

Related product manuals