UNI-T UT60E User Manual

3
Model UT60B/C/E: OPERATING MANUAL
Overview
This Operating Manual covers information on safety and
cautions. Please read the relevant information carefully
and observe all the Warnings and Notes strictly.
Warning
To avoid electric shock or personal injury, read the
“Safety Information” and “Rules for Safe Operation”
carefully before using the Meter.
Digital MultimeterModelUT60B, UT60Cand UT60E
(hereafter referred to as “the Meter”) has autorange and
manual range options with maximum reading 3999. The
enclosure structure design adopted advanced “co-injection”
technique in order to provide sufficient insulation.
In addition to the conventional measuring functions, there
is a RS232C standard serial port equipped with Model
UT60E for easy connection with computer to realize
macro recording and monitoring and capture of transient
dynamic data, displaying change of waveform during the
measurement, providing data and evidence to engineering
technicians for scientific research.This is also a highly
applied digital multimeter of good performance with full
overload protection and backlight function. Model UT60E
also has true rms reading for AC voltage and AC current
measurements.
Except where noted, the descriptions and instructions in
this Operating Manual apply to all Model UT60B/UT60C
/UT60E
.
Unless otherwise identified, all figures show the Model
UT60B.

UNI-T UT60E Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.01 - 10000 kHz
AC current range	0.4 - 10 A
AC voltage range	4 - 750 V
DC voltage range	0.4 - 1000 V
Dimensions (WxDxH)	85 x 177 x 40 mm
Battery voltage	9 V

Weight and Dimensions

Weight	320 g