UNI-T UT60E User Manual

The POWER button
This is a self-lock switch use to turn on or off the power of the
Meter.
The BLUE button
It uses for selecting the required measurement function when
there is more than one function at one position of the rotary
switch.
Turning on the Display Backlight
In order to avoid the hazard arising from mistaken readings
in insufficient light or poor vision, please use Display
Backlight function.
l Press and hold HOLD H
for over 2 seconds to turn the
Display Backlight on.
l Pressand hold HOLD H
again for over 2 seconds to turn the
Display Backlight off, otherwise it will stay on continuously.
Sleep Mode (Model UT60B/UT60C)
To preserve battery life, the Meter automatically turns off if you
do not turn the rotary switch or press any button for around 30
minutes.
To disable the Sleep Mode function, press BLUE button while
turning on the Meter.
Warning
25

UNI-T UT60E Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.01 - 10000 kHz
AC current range	0.4 - 10 A
AC voltage range	4 - 750 V
DC voltage range	0.4 - 1000 V
Dimensions (WxDxH)	85 x 177 x 40 mm
Battery voltage	9 V

Weight and Dimensions

Weight	320 g