UNI-T UT60E User Manual

Model UT60B/C/E: OPERATING MANUAL
cable and test clip from the Meter and turn the Meter
power off before opening the Meter case.
l When servicing the Meter, use only the same model
number or identical electrical specifications replacement
parts.
l The internal circuit of the Meter shall not be altered at
will to avoid damage of the Meter and any accident.
l Soft cloth and mild detergent should be used to clean the
surface of the Meter when servicing. No abrasive and
solvent should be used to prevent the surface of the Meter
from corrosion, damage and accident.
l
l
l
l
The Meter is suitable for indoor use.
Under the environment with high (+/-4kV) electrostatic
discharge, the Meter may not be operated as normal
condition. The user may require resetting the Meter.
Please take out the battery when it is not being used
for a prolonged period to avoid damages to the Meter.
Please constantly check the battery as it may leak
when it has been using for some time, replace the
battery as soon as leaking appears. A leaking battery
will damage the Meter.
6
International Electrical Symbols
AC (Alternating
Current)
Deficiency of Built-In
Battery
DC (Direct Current) Continuity Test
AC or DC Diode
Grounding Capacitance Test
Double Insulated Fuse
Warning. Refer to the
Operating Manual
Conforms to Standards
of European Union

UNI-T UT60E Specifications

General

Backlight	Yes
Product type	Digital multimeter
Frequency range	0.01 - 10000 kHz
AC current range	0.4 - 10 A
AC voltage range	4 - 750 V
DC voltage range	0.4 - 1000 V
Dimensions (WxDxH)	85 x 177 x 40 mm
Battery voltage	9 V

Weight and Dimensions

Weight	320 g