17
( figure 3)
Measurement Operation(1)
A. DC Voltage Measurement (see figure 3)
Warning
To avoid harms to you or damages to the Meter from
eletric shock, please do not attempt to measure
voltages higher than 1000V, although readings may
be obtained.
Select
The DC Voltage ranges are:
Model UT60F: 400mV, 4V, 40V, 400V and 1000V;
Model UT60G: 600mV, 6V, 60V, 600V and 1000V.
To measure DC voltage, connect the Meter as follows:
1. Insert the red test lead into the HzVΩ terminal and the
black test lead into the COM terminal.
2. Set the rotary switch to V ;DC measurement is
default or press BLUE button to select DC measurement
mode.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display.
red black
Model UT60F/G: OPERATING MANUAL
To Next Page
Loading...
Need help?
General
