36
This section provides basic maintenance
information including battery and fuse replacement
instruction.
Warning
Do not attempt to repair or service your Meter
unless you are qualified to do so and have the
relevant calibration, performance test, and
service information.
To avoid electrical shock or damage to the
Meter, do not get water inside the case.
A. General Service
l Periodically wipe the case with a damp cloth
and mild detergent. Do not use abrasives or
solvents.
l To clean the terminals with cotton bar with
detergent, as dirt or moisture in the terminals
can affect readings.
l Turn the Meter power off when it is not in use.
l Take out the battery when it is not using for
a long time.
l Do not use or store the Meter in a place of
humidity, high temperature, explosive,
inflammable and strong magnetic field.
B. Replacing the Battery (see figure 12)
( figure 12)
Screw
Maintenance(1)
Model UT60F/G: OPERATING MANUAL
To Next Page
Loading...
Need help?
General
