30
Sleep Mode
To preserve battery life, the Meter automatically turns
off if you do not turn the rotary switch or press any button
for around 10 minutes.
The Meter can be activated by turning the rotary switch
or pressing any button except the YELLOW button.
The Meter will be under Hold mode and display the last
measurement value before it entered sleep mode if it is
activated by pressing any button except the YELLOW
button. It is possible to exit Hold mode by pressing the
HOLD.
If the Meter is activated by turning the rotary switch, all
the reading will be erased. It will start from the
switch selected function.
In RS232C serial port data output mode, Sleep Mode
function will be disabled.
Model UT60F/G: OPERATING MANUAL
To Next Page
Loading...
Need help?
General
