Unify OpenScape DECT Phone S5 Base User Manual

109
Gigaset S850 / ALL UK en / A31008-XXXXX-XXXX-X-XX / extending.fm / 12/2/14
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Multiple handsets
DeutschEnglish
Registering a handset to multiple base stations
Your handset can be registered to up to four base stations. The active base station is the base
station to which the handset was last registered. The other base stations remain saved in the list
of available base stations.
¤ . . . use to select Settings OK Registration OK Select Base
OK . . . possible options:
De-registering the handset
¤ . . . use to select Settings OK Registration OK De-register
Handset OK . . . the handset being used is selected . . . use to select a different
handset if desired OK . . . enter system PIN if desired OK . . . Confirm de-registration
with Ye s
If the handset is still registered to other bases, it switches to the base with the best reception
(Best Base).
Locating a handset (Paging)
¤ Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time ("paging"), even if ringtones
are switched off.
Ending the search
¤ Briefly press the registration/paging key on the base station
or Press the End call key on the handset
or Press the display key Silence
on the handset
or No action. After approx. 30 seconds, the paging call will end
automatically.
Change active
base station:
¤ ... use or Best Base to select base station Select
(=select)
Best Base: The handset chooses the base station with the best
reception as soon as it loses connection to the current base station.
Change name of a base station:
¤ . . . use to select a base station Select (=selected)
Name change name Save
Paging
Silence

Unify OpenScape DECT Phone S5 Base Specifications

General

Brand	Unify
Model	OpenScape DECT Phone S5 Base
Category	Cordless Telephone
Language	English