UBio-X Face User Guide 48
UNIONCOMMUNITY Co., Ltd.
Address: 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,
E-Mail: sales@unioncomm.co.kr; http://www.unioncomm.co.kr
3.6.5.4. Delete image log
If you select the [System] [Database] [Delete image log] in the main menu,
the following window appears.
If you want to delete all the authentication record in the
terminal, click [YES] button, and if you want to cancel,
click the [NO] or [ ] button.
If there is no signal for five seconds in this state, the
message box disappears without deletion.
If it is deleted successfully by clicking [YES], the success message in [Fig. 3-5] is
displayed. The image saved as a log is only deleted and the authentication log is not
deleted.
3.6.5.5. Factory init
If you select the [System] [Database] [Factory init] in the main menu, the
following window appears.
If you want to initialize the terminal in the factory setting,
click [YES] button, and if you want to cancel, click [NO]
or [ ] button.
If there is no signal for five seconds in this state, the
message box disappears without initialization.
If it is deleted successfully by clicking [YES], the success message in <Fig. 3-5> appears,
and the display language and voice is changed to the default value English.
All the set value, users and log information besides the MAC address in the terminal to
make the terminal in the factory setting. The restoration after the deletion is
impossible, so be careful.
To Next Page
Loading...
Need help?
General
