Unitech HT682 User Manual

25
Before beginning installation, carefully read the following:
 Because you will be restarting your computer during installation, save your work and quit all
programs before you begin.
 To set up your communication settings, the HT682 serial cable is required to connect the
HT682 to your host computer.
 If you run the Windows NT® operating system with a service pack, you will be informed
during setup that you may need to reinstall the service pack. Try connecting first, and if
unsuccessful, reinstall the latest service pack.
Requirements
To synchronize, ActiveSync version 3.7 or higher must be installed on both your desktop
computer and the HT682 PDA Scanner. The HT682 PDA Scanner is installed with ActiveSync
and shipped. Therefore, you must install ActiveSync 3.7 on your desktop computer.
To install ActiveSync on your desktop computer, please link to Microsoft website to get free
download driver.
Installation
Follow the installation procedure below to install Microsoft ActiveSync, connect your HT682 to
your desktop computer, and establish a partnership for synchronization, if required.
In order to exchange data between your computer and the HT682, Microsoft ActiveSync must
be installed on your computer. Use A USB cable that comes with your device or the docking
station to connect the device to your computer.
NOTE: If you have a previous version of the Microsoft ActiveSync installed in your computer,
uninstall it first before installing the latest version of Microsoft ActiveSync.
To install Microsoft ActiveSync on your computer:
1. Close any open programs, including those that run at startup, and disable any
virus-scanning software.
2. Download the ActiveSync software from the Microsoft ActiveSync Download page at
http://www.microsoft.com/downloads/details.aspx?Fami-lyID=7269173a-28bf-4cac-a682-5
8d3233efb4c&DisplayLang=en.
3. Browse to the location of the downloaded file, and double-click it. The installation wizard
begins.
4. Follow the instructions on the screen to install Microsoft ActiveSync.

Unitech HT682 Specifications

General

Certification	CE, FCC, BSMI, VCCI, CCC, SRRC, RoHS
Product color	Black
LED indicators	Yes
Phone function	-
Keyboard layout	Alphanumeric
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, MSI, PLANET, POSTNET, U.P.C.
International Protection (IP) code	IP65
2D (matrix & stacked) barcodes supported	Aztec Code, Codablock, Code 49, Composite Codes, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Display diagonal	2.8 \
Display resolution	- pixels
Speakers	Mono
ROM capacity	512 MB
Internal memory	0.512 GB
Internal memory type	SDRAM
Compatible memory cards	SDHC
Maximum memory card size	32 GB
Processor family	OMAP AM3703
Processor frequency	0.8 GHz
USB 2.0 ports quantity	1
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Battery capacity	- mAh
Data network	EDGE, GPRS, GSM, HSDPA, UMTS
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	2.1+EDR
GSM bands supported	850, 900, 1900, 2100 MHz
Security algorithms	AES, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP, WEP, WPA, WPA2
Operating system installed	Windows Embedded Compact Professional 6.0 R3

Weight and Dimensions

Depth	30 mm
Width	55 mm
Height	170 mm
Weight	- g