Unitech MS836 User Manual

W060F06
W060F00
Transmit Programming
Barcode Data
*Do Not Transmit
Programming Barcode Data
Factory Defaults
Scanning the following barcode can restore
the scanner to the factory defaults.
You may need to reset your scanner when:
1. scanner is not properly configured so that it
fails to decode barcodes;
2. you forget previous configuration and want
to avoid its impact;
3. functions that are rarely used have been
enabled for the time being.
WFFD980
Restore All Factory
Defaults

Unitech MS836 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Scanner type	1D
Read rate (max)	100 reads/s
Maximum scan area	220 x 250 mm
Maximum scan width	220 mm
Linear (1D) barcodes supported	Codabar, Code 128, Code 39, EAN-13, EAN-8, GS1-128 (UCC/EAN-128), Interleaved 2 of 5, MSI, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Power consumption	85 mA
Buzzer	Yes
Certification	CE, FCC
Product color	Black
Housing material	Plastic
International Protection (IP) code	IP42
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	5 - 85 %

Weight and Dimensions

Depth	95 mm
Width	70 mm
Height	160 mm
Weight	150 g