- 9 -
1.7 Display Menu Tree
To enter main menu of MS916, press and hold Page Down button and then
press Page Up button. You will see the following screen on the MS916 display.
Now you can use Page Up/Down button to scroll through the menu and use
Scan button to make your selection.
The Display Menu Tree below is based on Auto Mode.
Top
Menu
Sub Menu Level 1 Sub Menu Level 2 Options/Result Default Setting
1. Scanner Type
BT HID/USB SPP/
BT SPP/BT SPP (Slave)
BT HID
2. Operation Mode Auto/Wedge/Batch Auto
3.1 View Date/Time Show date and time N/A
3.2 Set Date/Time SET DATE/SET TIME
2016-03-21
08:00:00
3.3 Time Display Auto/Always Auto
3. Date/Time
3.4 Exit Return to the previous menu N/A
4.1 Power Saving Disable/30/20/15/10/5 Sec. 15 Sec.
4.2 Auto Power Off Disable/30/20/15/10/5/3/1 Min. 5 Min.
4. Power Manager
4.3 Exit Return to the previous menu N/A
5. Setup By Label Enable/Disable Enable
6. FAC Default 6.1 Restore to FAC Default? Yes/No No
7. FW Version Show Firmware Version V0.61
8.Serial Number Please Scan S/N:
General
Setting
9. Exit Return to the previous menu N/A
1.View/ Edit Butt.
2. Erase Buffer
Data &
Memory
3. Free MEM Space Show Free Buffer Memory Space 20 KB
To Next Page
Loading...
Need help?
General
Weight and Dimensions
