2726
Using the external microphone
Use the optional external lapel microphone
“MC1” if you wear the uDirect 2 underneath
clothing during a phone call.
1. Plug the 3.5mm
microphone plug into
the audio input of the
uDirect 2, disabling
the internal uDirect 2
microphones.
2. Use the clip to place
the omnidirectional
microphone as close to
your mouth as possible.
3. Put the neckloop around
your neck and switch the uDirect 2 ON.
Jackets, etc., will not negatively influence the
wireless link to your hearing aids.
of the connect ( ) button will put the call
on hold. The caller stays on the line but there
is no audio transfer and the hearing aids
switch to the previous hearing program. Use
this mode to have a side conversation with a
person next to you without transmitting the
conversation to the person on the phone.
4. Transfer call
While in a phone conversation, a long press
of the access (
) button will transfer the
call to the phone. This allows you to hand
your phone to another person. Your hearing
aids will switch back to the previous hearing
program.
After holding or transferring a call, another long
press of the access (
) button transfers the call
back to the uDirect 2 and the call is resumed
through your hearing aids.
As long as the call is on hold or transferred, you
may use the access ( ) button to change your
hearing aid programs again.
To Next Page
Loading...
Need help?
General
