3332
Options for handling the FM signal during the
FM notification tone:
Accept: Briefly press the access (
) button.
Put on hold: Press the access (
) button for
2 seconds.
Ignore the FM notification tone: After
20 seconds the FM will be put on hold
automatically.
Briefly press the access (
) button to pause the
FM signal during streaming.
The FM input that is paused is automatically
kept in the background and can be restarted
as long as an FM signal is present by briefly
pressing the access (
) button.
As long as an FM signal is streaming the hearing
aid programs cannot be changed via the access
( ) button.
Using uDirect 2 with FM
uDirect 2 can be used together with FM
equipment.
1. Place the FM transmitter near the
sound source and turn it ON.
2. Turn the FM receiver ON if
required.
3. uDirect 2 must be switched ON
and worn correctly.
4. Attach your FM receiver to the
uDirect 2 via the FM input as
shown in the picture.
When FM is detected, you will hear the FM
notification tone for streaming through your
hearing aids. The FM notification tone is similar
to a phone ringtone.
To Next Page
Loading...
Need help?
General
