7574
Operating conditions:
This device is designed such that it functions without problems or
restrictions if used as intended, unless otherwise noted in these
user guides.
0° to 45° Celsius and relative humidity of <95% (non condensing).
Transport and storage conditions:
During transport or storage, the temperature should not exceed
the limit values of –20°/60° Celsius and relative humidity of 90%
for a long period of time. The air pressure between 500 and 1100
hPa is appropriate.
The symbol with the crossed-out garbage bin is to
make you aware that this device may not be thrown away as
normal household waste.
Please dispose of old or unused device, at waste disposal
sites intended for electronic waste, or give your device to
your hearing care professional for disposal. Proper disposal
protects the environment and health.
The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Unitron
is under license. Other trademarks and trade names are those of
their respective owners.
Australian EMC and Radiocommunications compliance label
reasonable protection against harmful interference in a residential
installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
The CE symbol is confirmation by Unitron that this Unitron
product meets the requirements of the Medical Devices Directive
93/42/EEC as well as the R&TTE Directive 1999/5/EC on radio and
telecommunications equipment.
This symbol indicates that the products described in these
user instructions adhere to the requirements for an application
part of Type BF of EN 60601-1. The surface of the device is
specified as applied part of Type B.
To Next Page
Loading...
Need help?
General
