Unitron uDirect Guide

13
procedure with the generic steps described here.
To pair your uDirect and mobile phone:
1. Charge and turn ON both your uDirect and mobile
phone. Place them next to each other.
2. Find the connectivity settings of your phone. Look
for the “Bluetooth” feature in the main menu or
one of the submenus such as “Connectivity”.
3. On your mobile phone, ensure that the Bluetooth
feature is turned ON.
4. Initiate the pairing process on your uDirect by
pressing the Bluetooth button for about 2 seconds
until the Bluetooth indicator flashes blue. Your
uDirect will remain in the pairing mode for two
minutes or until the pairing is completed.
5. On your mobile phone choose to search for
Bluetooth devices or audio enhancements.
6. Your mobile phone should present a list of
Bluetooth devices discovered. Select “uDirect”
from this list.
7. Your mobile phone may then ask you to enter a
passcode. If so, enter “0000” (four zeros).
Your uDirect should now be paired to your mobile
phone. Some mobile phones may ask which Bluetooth
service you wish to enable. Select “Headset” and, if
available, “Stereo Headset”.

Unitron uDirect Specifications

General

Brand	Unitron
Model	uDirect
Category	Accessories
Language	English