Unitron uDirect Guide

15
and Bluetooth transmitter. The pairing procedure is
controlled by the device with which you are
attempting to pair. Such devices vary in the procedure
they require for pairing. You should therefore refer to
your device’s user guide or dealer support if you
cannot complete the pairing procedure with the
generic steps described here.
1. Charge and turn ON both your uDirect and
Bluetooth transmitter. Place them next to each
other.
2. Initiate the pairing process on your uDirect by
pressing the Bluetooth button for about 2 seconds
until the Bluetooth indicator flashes blue. Your
uDirect will remain in the pairing mode for two
minutes or until the pairing is completed.
3. Set your Bluetooth transmitter into pairing mode.
With some devices,the pairing process is simply
initiated by turning them ON.
4. A Bluetooth transmitter typically doesn’t require a
passcode or passkey to establish a connection with
uDirect. If a passcode is required, enter “0000”
(four zeros). Typically, with Bluetooth transmitters
the connecting process is automatically performed
after pairing. After initiating pairing, simply wait
until the devices have completed the pairing.
Confirmation of successful connection is indicated on

Unitron uDirect Specifications

General

Brand	Unitron
Model	uDirect
Category	Accessories
Language	English