Universal Remote Contorl MX-3000 User Manual

Programming RF Control Options
TThhee RRFF SSeettuupp WWiinnddooww
The RF Setup window opens after selecting RFControl from the Program Menu or
clicking on the shortcut button.
AAddjjuussttiinngg SSiiggnnaall aanndd IIRR OOuuttppuutt OOppttiioonnss
The RF Setup window enables you to adjust the properties of RF Control by clicking on the intersection of a row and a column
and then selecting from the pull down list box the property you want.All of your devices are displayed. You can set each device
individually to be controlled by clicking on the cell you want to change.After clicking, a list box of options will appear.
SS
IIGGNNAALL
controls how the MX-3000 will send commands:
IR and RF - Both RF signals and IR commands
are sent from the MX3000. The RF
signals will also be issued as IR com-
mands by the MRF-250.
IR - Only IR commands are sent from
the MX3000, as a result the MRF-
250 does not send any commands.
RF - Only RF signals are sent from the
MX3000, as a result only IR com-
mands from the MRF-250 are
received by the device.
RR
EECCEEIIVVEERR
enables you to select which MRF-250
receiver will receive the commands for this
device.Thus, you can send commands to a device
in another location via a second MRF-250 placed
in that location (up to 16 in one house).
Note: In a system with only one MRF-250 receiv-
er, this does not need to be adjusted.
4455
RRFF CCoonnttrrooll
M
X
3
0
0
0
T
O
U
C
H
S
C
R
E
E
N
R
E
M
O
T
E
S

Universal Remote Contorl MX-3000 Specifications

General

Brand	Universal Remote Contorl
Model	MX-3000
Category	Remote Control
Language	English