2/3
Corrective measures for the PCL-XL error.
The PCL-XL error occurs when printing a certain PDF file. - Therefore, this is corrected.
Corrective measures for the XPS error.
The XPS error occurs when printing a certain PDF file using the XPS driver. - Therefore, this is corrected.
Corrective measures for the system error (CF248).
The CF248 error occurs with a certain data. - Therefore, this is corrected.
Corrective measures for the system error (CF248).
The CF248 error may occur when printing a Mac Illustrator file. - Therefore, this is corrected.
Corrective measures for the system error (CF248/CF46F).
The CF248/CF46F error occurs when printing a certain file from Mac. - Therefore, this is corrected.
Corrective measures for the system error (CF258).
The CF258 error occurs with a certain data. - Therefore, this is corrected.
Corrective measures for the system error (CF46F).
The CF46F error occurs after outputting the data in the midstream and stopping print when sending a certain aggregation data.
Therefore, this is corrected.
Corrective measures for the lock-up with a certain data.
The PCL-XL error occurs or nothing is output while showing “Processing” with a certain data - Therefore, this is corrected.
Corrective measures for the lock.
The “Processing” lock-up occurs with a certain data. - Therefore, this is corrected.
Corrective measures for the image failure.
Colors may drop out when printing the Mac Illustrator file. - Therefore, this is corrected.
Corrective measures for the image failure.
White streaks may appear when printing a certain data. - Therefore, this is corrected.
Corrective measures for the image failure.
Undesired characters and lines may be printed with the PCL macro printing. - Therefore, this is corrected.
Corrective measures for the image failure.
Image dropout of 6mm width may appear when setting [Gutter] in the KX driver. - Therefore, this is corrected.
Corrective measures for the image failure.
Black streaks may appear when printing a Mac Illustrator file. - Therefore, this is corrected.
Corrective measures for the image formation error.
Image formation may fail when printing using the GRRD command. - Therefore, this is corrected.
Corrective measures for the PCL macro error not being called.
Ruled lines may not be printed with the PCL macro not being called. - Therefore, this is corrected.
Corrective measures for the macro failure.
The 1st page text may not be printed when printing a macro data using a CF card (printing a macro only). - Therefore, this is corrected.
Corrective measures for the failure that B/W data is printed in color.
A certain data intending B/W print is printed in color mode when using a macro. - Therefore, this is corrected.
Corrective measures for the failure of outputting a blank pages with Prescribe.
A blank page may be output with a certain prescribe data. - Therefore, this is corrected
Prevention of the Prescribe mode entry with a certain file.
If the character codes 0x21, 0x52 and 0x21 (!R!) exist in series in the PCL5 data, Prescribe mode is unintentionally entered and no data is
printed after that. - Therefore, this is corrected.
Corrective measures for the barcode print failure.
Barcodes drop out partially when using the Barcode flash. - Therefore, this is corrected.
Corrective measures for the form overlay failure.
Characters in the second page and after are rotated when inserting form overlay in Prolog/Epilog of the KX driver.
Therefore, this is corrected.
Corrective measures for the Dutch status page message failure.
Translation of “Cyan” and “Yellow” in the toner gauge of the Dutch status page is incorrect. - Therefore, this is corrected.
Corrective measures for the SMB protocol printing failure.
LF code may be ignored in the SMB protocol printing. - Therefore, this is corrected.
DDNS cannot be registered.
DDNS cannot be registered in DHCP. - Therefore, this is corrected
"admin00" password support.
Preventive support for the Command Center setting not being changed.
To Next Page
Loading...
Need help?
General
