Utax CLP 3721 User Manual

1/3
Technical Bulletin UTAX
UTAX
CLP 3721
CLP 3726
T
A
TA
CLP 4721
CLP 4726
TB-31B
2NR-H206r1/M Date: 11-02-2019
Priority:
…A  highest priority / …B  second priority / …C  other / …S Service Information
Note when cleaning / replacing the feed roller unit
Model: P-C2660MFP, P-C2660iMFP, P-C2665MFP, P-C2665iMFP, P-C3060MFP, P-C3062iMFP, P-C3065MFP, P-C3066iMFP, P-C3560iMFP,
P-C3562iMFP, P-C3565iMFP, P-C3566iMFP, 260ci,
261ci, 355ci, 356ci
CDC 1626, CDC 1726, CDC 5526, CDC 5526L, CDC 5626, CDC 5626L / DCC 2626, DCC 2726, DCC 6526, DCC 6526L, DCC 6626, DCC 6626L
P-C2160DN, P-C2660DN, P-C3061DN, P-C3062DN, P-C3560DN, P-C3562DN, P-C4070DN, P-C4072DN
CLP 3721, CLP 3726 / CLP 4721, CLP 4726
Rev.1  Permanent measures / new models listed
N OTE :
If the following information of the operation failure is provided in the field when cleaning or replacing the feed roller unit, there
might be the possibility that the pickup spring comes off when attaching/detaching the feed roller unit. Therefore, check if the
spring is available in the correct position.
For the permanent measures of the pickup spring coming off, change the shape of both the pickup spring and the paper feed
holder of the feed roller unit.
C ONTENTS OF THE PERMANENT MEASURES :
SPRING PICKUP No.1- + No.3-
Note. Make sure it should not come off/be lost when
attaching / detaching the feed roller unit
PARTS HOLDER FEED ASSY SP No.2-
Arrow view A Cross boss
Pickup spring (No.3) content of changes:
Paper feed holder content of changes:
Back side of the machine: Back cover is open
New SPRING PICKUP No.3-
Paper feed holder
A
NE
W
Change the shape
Before: 2mm  After: 3mm
(One side rib only)
Change the shape

Utax CLP 3721 Specifications

General

Brand	Utax
Model	CLP 3721
Category	Printer
Language	English