Utax CLP 3721 User Manual

1/3
Technical Bulletin UTAX
UTAX
CLP 3721
CLP 3726
TA
TA
CLP 4721
CLP 4726
TB 19 / Toner supply failure…
2KT-D022/M
Date: 07-03-2013
T OPIC :
When the joint (X) at the machine left side insufficiently engages the joint (Y) at the toner container due to dimensional
variation of the parts or the assembly, the machine drive may not be transmitted to the toner container and the toner supply
may fail. And, the toner replacement message may frequently appear even if the toner container is replaced with the new
one. Thus, the following is changed.
C ONTENT OF CHANGES :
The shape of CAM TONNER SUPPLY (No.1), that thrusts the joint at the main machine in the engaging and disengaging
directions, is changed to facilitate the joints engagement of the main machine and the toner container.
Opening the top tray fully without all the toner containers Toner container left side (Drive section)
Joint at the toner container (4 colors) Joint at the machine left side (4 parts)
1. CAM TONER SUPPLY
Joint (X)
Disengage Engage
Engaged when the top tray is closed.
Thrust
Joint (Y)
The engagement shape (of Joint X, Y) differs depending on
the model and the spec.

Utax CLP 3721 Specifications

General

Brand	Utax
Model	CLP 3721
Category	Printer
Language	English