Utax CLP 3721 User Manual

2/3
Parts motion when the top tray is opened and closed
- Top tray open: CAM TONER SUPPLY thrusts the joint (X) in the disengaging direction indicated in page 1.
(The toner container can be detached by disengagement of the joints.)
- Top tray close: CAM TONER SUPPLY slides in the engaging direction and the joint (X) of the machine engages the joint
(Y) of the toner container by the pressure of the spring attached inside the joint (X).
(The machine drive is transmitted to the toner container by engaging the joints, and the toner conveying screw in the toner
container is rotated to supply the toner.)
CAM TONER SUPPLY (No.1)
No.
Old Part
No.
New Part
No.
Description
Q’ty Compatibility
Remarks
Old New Old New
1 ------------ 2KV02461 CAM TONER SUPPLY - 4
- O
The above is available this time.
Joint (X)
Machine left side
Hole of the toner container left
guide that inserts the joint
Toner motor holder
(Attached to outside
of the left frame)
Toner container left side
Joint (Y)
Machine left inner side
New
The edges of the entry shape are cut to avoid the contact with the rib around the joint (Y) of the toner container
For securing the margin for the joint's engagement when
the toner motor holder is bent, the snap-fit shape that
hooks the toner motor holder is changed and its arm's
length is extended by 1mm.
Arm's length
(Same as the
low side)
The outer diameter of the insertion shape is reduced by thinning its thickness so that the gap margin between it
and the hole for inserting the joint of the toner container left guide is secured to avoid the contact with the hole
for inserting the joint.
- Old outer diameter: 16.95mm (+/-0.04mm)
- New outer diameter: 16.75mm (+/-0.04mm)
1. CAM TONER SUPPLY

Utax CLP 3721 Specifications

General

Brand	Utax
Model	CLP 3721
Category	Printer
Language	English