Utax CLP 3721 User Manual

2/3
T HE WAY TO ATTACH THE NEW / OLD PICKUP SPRING :
The way to attach the new pickup spring (New No.3)
The way to attach the old pickup spring (Old No.3)
Insert the pickup spring into the cross-shape boss of the feeding holder and press the spring until the edge of the spring
contacts the surface (X) of the feeding holder. (Fig.1)
The way to check the attachment of the old pickup spring (after attaching the feed roller unit)
* It is necessary to re-attach it if the condition does not apply the following.
- Touch the bottom of the pickup roller of the feed roller unit by fingertips and the rebound of the spring is felt if pressing it in
the upper direction (Fig.2)
- Look in the installed position of cassette 1 (bottom part of the machine inside) from the front side of the machine and the
pickup spring does not come off. (Fig.3)
Set Pickup spring as the service part in the field:
P ARTS T ABLE
No.
Old Part
No.
New Part
No.
Description
Q’ty Compatibility
Affected model
Remarks
Old New Old New
1 ----------- 302KV06280 SPRING PICKUP - 1
- O
Permanent measures:
P ARTS T ABLE
No.
Old Part
No.
New Part
No.
Description
Q’ty Compatibility
Affected model
Remarks
Old New Old New
2
302KV94191 302KV94192
PARTS HOLDER FEED ASSY SP 1 1
X O
*1
3 302KV06280 302KV06281 +SPRING PICKUP 1 1
X X
*1
"+" mark at the beginning of the part name means it is a component part.
*1: For the unit with the permanent measures not taken, in case the pickup spring come off or is lost, replace with the new feed roller unit
(New No.2). The new pickup spring cannot be attached to the unit the permanent measures not taken due to the attachment
compatibility. If it is necessary to replace the spring, replace with the feed roller unit.
Once the pickup roller is pressed, the fingertips
should feel the rebound of the spring.
Pickup spring is not coming off in the installed position of
cassette 1 (bottom part of the machine inside)
* Attaching/detaching the feed roller unit should be done with
the condition of cassette 1 pulled out.
Pickup spring
Cross-shape boss of the
feeding holder
Press in
Fig.1 Fig.2
Fig.3
Hook the B section of the new pickup spring (New
No.3) to the step of the paper feed holder.
Arrow view C
C
B
Step
X

Utax CLP 3721 Specifications

General

Brand	Utax
Model	CLP 3721
Category	Printer
Language	English