3/3
Classification:
At Set Up
Next Visit / Service Call
Next Periodic Maintenance
X
Information only
No modification necessary
Field Measure:
When detaching/attaching the feed roller unit (Only the units without the permanent measures)
Make sure to confirm if the pickup spring is attached correctly. In case the pickup spring come off or
is lost, replace with the new feed roller unit (New No.2). (It is possible to reattach the pickup spring
(Refer to the page 2) but in order to prevent the above phenomenon from reappearance,
recommend to apply the permanent measures)
When replacing the pickup spring
Since it is not possible to use the new pickup spring for the unit with the permanent measures,
replace with the feed roller unit. (Refer to the service manual “Detaching/attaching the feed roller
unit” for the replacement procedure of the feed roller unit. Refer to the page 2 for the way to attach
the new pickup spring (New No.3))
Serial Nos.:
P-C2660MFP
No production
P-C2660iMFP
No production
P-C2665MFP
No production
P-C2665iMFP
No production
P-C3060MFP
No production
P-C3062iMFP
RBV8Y00882
P-C3065MFP
No production
P-C3066iMFP
RBZ8Y01306
P-C3560iMFP
No production
P-C3562iMFP
RC38Y00844
P-C3565iMFP
No production
P-C3566iMFP
RC78Y02473
260ci
No production
261ci
No production
355ci
No production
356ci
RCA8Y01145
CDC 1626 - DCC 2626
No production
CDC 1726 - DCC 2726
No production
CDC 5526 - DCC 6526
No production
CDC 5626 - DCC 6626
No production
CDC 5526L - DCC 6526L
No production
CDC 5626L - DCC 6626L
No production
P-C2160DN
No production
P-C2660DN
No production
P-C3061DN
No production
P-C3062DN
RCE8Y00986
P-C3560DN
No production
P-C3562DN
RCJ8Z01093
P-C4070DN
No production
P-C4072DN
RCP8Y00716
CLP 3721 - CLP 4721
No production
CLP 3726 - CLP 4726
No production
To Previous Page
Loading...
Need help?
General
