2/3
Distinction of the new and old HINGE LID R/L
Material indication engravings different
- Parts before the corrective measures 2
(Not supplied to field)
>ABS<
P2H-AT
- Parts improving the toughness
(302KV0254_/302KV0253_)
(Toner container side)
Toner container right guide (Below is the side contacting the right frame.)
HINGE LID R (2KV02542)
1. RATCHET SHUTTER
2. HOLDER JOINT
Joint
at the machine side
(Below fits the thrust spring)
New
1. RATCHET SHUTTER
Added the shape
Added the rib for
distinction
Part, switching the toner container shutter, in the machine
R
L
Top tray
(PARTS LID TOP M ASSY SP)
Enlarged figure of L in the left figure
Enlarged figure of R in the left figure
Material indication engraving
Material indication engraving
HINGE LID L 2KV02532
HINGE LID R 2KV02542
Distinction of the new and old HINGE LID R/L
Material indication engravings different
Parts before the corrective measures 2
(Not supplied to field)
>ABS<
P2H-AT
Parts improving the toughness (2KV02542 / 2KV02532)
>PC<
LV-2225Y
Applied serial numbers of the machine that may damage HINGE LID R/L
For CDC 1626, CDC 1726 / DCC 2626, DCC 2726 only
HINGE LID R or HINGE LID L may be damaged if forcibly pushing up the top tray because the machines with the serial number indicated
in the table in page 4 are before change of the material as the corrective measures 2).
If damaged, please replace them with the new parts (302KV02542/302KV02532).
As for the distinction of the new and old HINGE LID R/L, please check the material indication engraving on the HINGE’s side.
Machines that may damage HINGE LID R/L (Older serial numbers than the corrective measures 2
CDC 1626 / DCC 2626 Q880600001~Q880Z01276
CDC 1726 / DCC 2726 Q890600001~Q890Z04602
To Next Page
Loading...
Need help?
General
