7/7
14. Press the Upward or Downward key repeatedly until M 12345 3 appears.
15. Press OK . 00000 or 0 will be displayed for each value and the cursor (_) will flash under the H value. (Fig.22)
16. In the color registration correction chart printed in Print Registration Chart above, note the numbers of the sections in the
magenta H and V charts where the lines most closely coincide as a single straight line. In the left example, the value
would be B. (Fig.23)
17. Press the Upward or Downward key until that value is displayed. (Fig.24)
18. Use the Leftward or Rightward key to move the cursor right and left. Perform the same operation as you did for the H
value in order to find the V values in the color registration correction chart, and select those values on the operation
panel as well.
19. Press OK . OK? and each of the entered values will be displayed. If the numbers shown are correct, press OK . This
completes the settings for magenta.
20. After completing the settings for magenta in step 19 above, press the downward key.
C 12345 3 and Y 12345 3 are
displayed. As with magenta, note down the values for cyan and yellow from the color registration correction chart. (Same
as Step 15 to 19.)
21. After completing the settings for all three colors, press MENU . The display returns to Ready.
Classification:
Entire Stock Rework
In-Field modification at next visit
In-Field modification by case
No modification necessary
Field Measure:
Serial Nos.:
CDC 1626L /
CDC 1726L /
CDC 5526L /
CDC 5526L /
CDC 5626L /
CDC 5626L /
CLP 3721L /
CLP 3726L /
DCC 2626L
DCC 2726L
DCC 6526L
DCC 6526L
DCC 6626L
DCC 6626L
CLP 4721L
CLP 4726L
Service information only
(Fig.21)
(Fig.18)
(Fig.19)
(Fig.20)
(Fig.22)
(Fig.23)
(Fig.24)
To Next Page
Loading...
Need help?
General
