2-14 Loading Paper
Loading Paper into MP (Multi-Purpose)Tray
This machine can load up to 50 sheets of 11 × 8 1/2" or A4 paper
(80 g/m²) into the MP Tray.
1 Pull the MP tray towards you until it stops.
2 Adjust the position of the paper guides on the MP tray. Standard
paper sizes are marked on the MP tray. For standard paper sizes,
slide the paper guides to the corresponding mark.
3 Pull out the subtray.
4 Align the paper with the paper guides and insert as far as it will go.
IMPORTANT When pulling the cassette out of the printer, ensure
it is supported and does not fall out.
Note Do not load more paper than exceeds the tab of the MP
tray.
To Next Page
Loading...
Need help?
General
